Page 18 of 20
Re: new 5/6 plate clutch for lambrettas
Posted: Fri Oct 25, 2013 9:36 pm
by Fux
Went for a short ride today and i'm realy chuffed with the clutch.
It feels pretty much like a standard jobbie to pull in and the pull of the rb wrenches my guts so its def. not slipping.
I wont get to ride the 5 plate I bought for my TS until spring.
Re: new 5/6 plate clutch for lambrettas
Posted: Sat Oct 26, 2013 9:24 pm
by MAB
Joe,
The 6 plater I got from Lee that I run in my TaylorTuned 36hp doesn't have a packer .
Nice to see your scoot performing well at the shoot out matey
Mark
Re: new 5/6 plate clutch for lambrettas
Posted: Tue Oct 29, 2013 7:55 pm
by thebassmasta
does anybody have a contact number for Lee? i have tried pm but im getting no reply
thanx
Tony
Re: new 5/6 plate clutch for lambrettas
Posted: Tue Oct 29, 2013 8:40 pm
by sydduckett
thebassmasta wrote:does anybody have a contact number for Lee? i have tried pm but im getting no reply
thanx
Tony
Yeah same as that really, Xmas present from the mrs..
Re: new 5/6 plate clutch for lambrettas
Posted: Sat Nov 02, 2013 7:37 pm
by thebassmasta
i take it lee is not doing these clutches then, ive sent 2 messages yes or no would be sufficiant, but i will look elswhere now
Re: new 5/6 plate clutch for lambrettas
Posted: Sat Nov 02, 2013 7:39 pm
by RICSPEED
are the messages read or unread .. have you checked when he was last on line ??
Re: new 5/6 plate clutch for lambrettas
Posted: Sat Nov 02, 2013 7:49 pm
by thebassmasta
yes both messages read, I give in buddy
Re: new 5/6 plate clutch for lambrettas
Posted: Sun Nov 03, 2013 9:31 pm
by TED CRUD
go Jockeys Boxenstop ,LTH for the MMW 7 plate no packer clutch
Re: new 5/6 plate clutch for lambrettas
Posted: Sun Nov 03, 2013 10:40 pm
by thebassmasta
TED CRUD wrote:go Jockeys Boxenstop ,LTH for the MMW 7 plate no packer clutch
Not at £429 plus postage
Re: new 5/6 plate clutch for lambrettas
Posted: Sun Nov 03, 2013 11:24 pm
by 10 inch Terror
I tried one of these clutches and had no joy with it (as already stated further back in the thread) I was convinced I needed a super duper clutch when in reality a standard clutch fitted with MB springs was more than up to the job. It wasnt until I fitted an NK race to my Imola that the clutch started to slip. I then put in a 5 plate kit from Readspeed into my existing clutch and it was fine. I'm not trying to put anyone off these clutches or slag them I'm just saying how it was for me.