Scooterotica

Richest setting is bottom clip...

7

drunkmunkey6969 wrote: ↑Thu Jul 20, 2017 9:44 am Richest setting is bottom clip...

I have on the top, so at its leanest, so should go for a leaner needle is that X7 and start on bottom clip?

compass wrote:7

drunkmunkey6969 wrote: ↑Thu Jul 20, 2017 9:44 am Richest setting is bottom clip...

I have on the top, so at its leanest, so should go for a leaner needle is that X7 and start on bottom clip?

X13 top clip and X7 second from top is very similar when looking at needle profile and given throttle position. No need to start from bottom up.

Skickat från min F3311 via Tapatalk

How are you getting on with the 240 George?

It's fantastic, really pleased with it.

I've changed from 17/46 to 16/46 on the sprockets as I'm 112kg in weight and was finding it hard to get on the pipe in 4th (fran race) but with the 16 on the front it's perfect.

what bhp/torque is the 240 making with the fran race pipe?

I've not had it dyno'd so can't say for sure, but on Rich's figures he's expecting mid 20's with an expansion I think.

Sent from my SM-G920F using Tapatalk

What flywheel and ignition are you using ?

Latest (v4?) bgm DC stator with a elemec flywheel. Using a kheper cdi but also tried it with a cheap scootopia cdi which also seemed fine.

Tried a scootronics stator but it didn't work we'll for me, likewise with the external pickup, they didn't seem to play well with the kheper.


Sent from my SM-G920F using Tapatalk

GeorgeS wrote: ↑Thu Nov 23, 2017 9:32 pm ............Tried a scootronics stator but it didn't work we'll for me, likewise with the external pickup, they didn't seem to play well with the kheper.

I reckon the problem is the external pickup rather than the stator, my external pickup wouldn't work with an Mtech either. Mr Tambs said as much on his FB page but a bit disappointing he didn't mention that before hand.

Colin