Scooterotica

top man Holty and thanks again for the advise, my one is in for paint and the build starts next week

regards Harry

soulster22 wrote:top man Holty and thanks again for the advise, my one is in for paint and the build starts next week

regards Harry

your welcome, hurry up and get some pics loaded on here and start a build thread, it will create plenty of intrest.
heres some pics of my digital gear indicator, first one is of the gearchange lever with the sensors on a bracket i made
IMG_1894_zpsgi39vdya by stephen holt, on Flickr

this pic shows the digital readout, i mounted it on a small stainless steel bracket, it has a zero for neutral and 1 for first
2 for second and so on until 6th gear, a good way to keep track of what gear im in.
IMG_1897_zpsug2inwer by stephen holt, on Flickr

collected my crankshaft yesterday, fully refurbed, 2 new conrods big and little ends, 4 main bearings, 1 lab seal 2 main seals and one new web, fitted together and balanced and welded.
IMG_1895_zpsgjqz1n4z by stephen holt, on Flickr
IMG_1896_zpsmwkc28db by stephen holt, on Flickr

heres the bare engine case ready for rebuid.
IMG_1898_zpsy7tqziag by stephen holt, on Flickr

crankshaft and gears in place ready to start the rebuild
IMG_1899_zpsx2lztthd by stephen holt, on Flickr

cases assembled, clutch basket fitted.
IMG_1908_zpsqz1yyg6h by stephen holt, on Flickr

engine all rebuilt and ready to fit back into the frame
IMG_1907_zpsf1sipex1 by stephen holt, on Flickr

IMG_1906_zpseynuojbf by stephen holt, on Flickr

Looking good.

T5-190 wrote:Looking good.

cheers,
got the engine back in the frame, and the chain connected, will do some more tomorrow.