Scooterotica

Mr Frog. Your idea with the airbox has already been done. There's a bloke on here called Scooter Loopy John who did the exact same thing, and he was pleased with it. I thought it was an interesting idea at the time and it seems like a good way of utilising what little space you have in the toolbox.

good to hear it.

here it is:
http://scooterotica.org/forum/viewtopic ... ox+air+box

I did have a photo of it somewhere. But typically I can't find it now.

too bad...

This one?
http://scooterotica.org/forum/viewtopic.php?f=7&t=13732

many thanks ArKaTxU...
I'm doing it bigger with a 50mm diameter/ 80 long tube passing through the AB wall.
I'm thinking of welding a bigger manifold underneath the AB and fitting a larger air bellow. Don't know which one could fit easily....

Works well i also opened up the gap between the seat support , but not realy needed.

I see you didn't open up louvres. Could it be interesting?

It seems that you welded a bigger section manifold bolted under the AB. Can you confirm?

exhaust almost completed: