Re: changed clip position and needle, still bogging down
Posted: Sat May 08, 2010 9:18 am
Hi LS, I'm using the same carb, exhaust set up on my SR185. My current settings are:-
120 main
70 choke
40 slide
x7 needle (3rd clip)
50 pilot
av264 atomiser
Hope this helps, good luck with it all, as Special x says nothing worse...........
skp
120 main
70 choke
40 slide
x7 needle (3rd clip)
50 pilot
av264 atomiser
Hope this helps, good luck with it all, as Special x says nothing worse...........
skp