Page 2 of 2
Re: IMOLA exhaust advices
Posted: Mon Dec 28, 2009 7:35 pm
by ricky
sjc wrote:just building a engine for my mate imola 186 kit,, li 150 16 x 46 gearing,, 28mm dellorto,, scoot rs exhaust.. any idea on jetting details??
for information...
http://www.forums.ilambretta.com/viewto ... mola#p7377
imola eta system (early varitronic)
scootrs pipe (stainless).
15-46, li150.
28phbh (no filter).
main 120
pilot 51
atomiser av268
needle x2, p2
slide 40.
Re: IMOLA exhaust advices
Posted: Mon Dec 28, 2009 8:03 pm
by drew2
running indian GP200 box,18*47 sprockets,30mm delly
and mb uprated springs,casings and barrell matched,mb
head,meceur crank,the only thing i intend on doing is
to put my 5 plate clutch in as this is the second set of
clutch plates ive burnt out this year
.
Re: IMOLA exhaust advices
Posted: Mon Dec 28, 2009 8:51 pm
by Skar
I run a 30mm PHBH, JL3 with a Pacemaker Box, 46/16, and PowerTrack 100/90/10 giving me a 5.3 ratio. I live in the country and find this pretty good for A Roads and B Roads, it will pull 4th from about 30 mph.
Clutch is standard, changed the plates at 4000 miles (maybe more) though they were actually still ok.
Re: IMOLA exhaust advices
Posted: Mon Dec 28, 2009 10:07 pm
by ricky
Skar wrote:I run a 30mm PHBH, JL3 with a Pacemaker Box, 46/16, and PowerTrack 100/90/10 giving me a 5.3 ratio.
ok skar
but what kind of exhaust do u use, regular jl road or franspeed ??
what's your delly set up ?
please let us know...
Re: IMOLA exhaust advices
Posted: Tue Dec 29, 2009 11:35 am
by Skar
ricky wrote:
but what kind of exhaust do u use, regular jl road or franspeed ??
what's your delly set up ?
please let us know...
It's a regular JL road, sorry, can't remember the jetting but will take a look when I get chance.