Re: mag housing modification
Posted: Sat Dec 26, 2009 9:43 pm
Yes, three hours is plenty.
Next year will be cooled by direct scoop so all this will be gone!
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
mag housing modification
Page 2 of 2
Re: mag housing modification
Posted: Tue Dec 29, 2009 8:26 pm
As promised - here are some pictures of the cooling modification on my race bike.
Next year will be cooled by direct scoop so all this will be gone!
Next year will be cooled by direct scoop so all this will be gone!
Re: mag housing modification
Posted: Tue Dec 29, 2009 9:49 pm
Cheers Paul, what's the bolt through the flange at the bottom?
Re: mag housing modification
Posted: Tue Dec 29, 2009 10:07 pm
its up to you matey of course,but i would not try to mod it in situ...
its easy to remove,and therefore easier to work on .
its easy to remove,and therefore easier to work on .
Re: mag housing modification
Posted: Tue Dec 29, 2009 10:57 pm
The Bolt is for one of the exhaust rubber mounts which is on the reverse of the mag housing