Scooterotica

That looks very well made, Tino Saachi does seem to have an ability to produce what others would struggle to just imagine...

The adjuster does look very much like a modified version that Charlie Emdunds currently uses on his group 4 race scooter with two bearings and a neatly machined nylon roller adjusting the chain inwards (on Charlies) instead of pushing outwards as on standards scooters to remove slack.

Just maybe, Charlie might have had a look at this while it was in the design stage

I got a flyer of that kit I took directly from Tino Sacchi, who I met on a scooter custom show 2 weeks ago here in Italy (Tino was also showing the kit itself)


I can try to scan it

6LDA 28B wrote:I had a ktm with a 560cc rotax engine it had a cam belt that would run problem free as long as the pulley wheels were fitted correctly just a few mm out and it would shred the belt in minutes.
Could the Tino have a dry clutch and a sealed gearbox end plate

You need a hole in the end plate for the kickstart