Page 2 of 3
Re: My RB20 bites the dust
Posted: Thu Sep 03, 2009 3:26 pm
by J1MS
No I cant think what they might say...
Re: My RB20 bites the dust
Posted: Wed Sep 09, 2009 10:15 pm
by flatnacker
6LDA 28B wrote:Reading all the posts about cranks it seems everyone has problems with AF cranks or copies of their cranks and everyone praises Mb and their alfa crank, i know where i will be spending my money.
Have heard good things about Jb's new cranks anyone used one yet, looking at getting a 62mm crank
hey im running one of jb,s cranks its great ive rung my ts1 neck for 1000 miles no worries the motor sounds the same as when i built it...mint looking too.
Re: My RB20 bites the dust
Posted: Wed Sep 09, 2009 10:22 pm
by bsso78
[quote="sydduckett"]I was told that this was a problem with the RB kit as supplied by AF, so ended up getting the kit via Taffspeed. they supplied there own semi-race crank which i belive is the same as the AF version apart from the webbing? I also believe it started life as an indian part but im not that clued up on this sorta thing...
I could be reading this wrong but........where do you think Taffs get RB kits from?
Re: My RB20 bites the dust
Posted: Wed Sep 09, 2009 10:51 pm
by sydduckett
As in, I brought the rb kit via taffspeed minus the AF crank and then used a taffspeed equivalant......
Re: My RB20 bites the dust
Posted: Sun Oct 18, 2009 9:31 pm
by carlos fandango
Thought i should post an update to this.
Well the kit and crank were posted back to AF, via Readspeed (from where i purchased it)
The upshot is that they have agreed to exchange the lot.
They are just waiting for some new cranks from italy.
Should have it all the end of next week :bouncyeng:
So cant grumble at that.
Re: My RB20 bites the dust
Posted: Sun Oct 18, 2009 9:46 pm
by caspa2006
nice one russ, have you got the number/email of the bloke down blakedown i need some gp forks but not indian crap as i want them twisted if you have can you pm me it or email it
www.foamwizardsltd@aol.com
cheers
del
Re: My RB20 bites the dust
Posted: Sun Oct 18, 2009 11:32 pm
by carlos fandango
pm sent
Re: My RB20 bites the dust
Posted: Mon Oct 19, 2009 5:54 am
by adriang
bsso78 wrote:sydduckett wrote:
I could be reading this wrong but........where do you think Taffs get RB kits from?
They get them from AF.
I bought an RB22 kit from my local dealer, Retroscooters. I sent it to Taffspeed to get it tuned, and the first thing they did was replace it with another one from AF. From what Ian told me, he was at the shop, and chose the one he wanted. No idea what criteria he used for the choice.
Re: My RB20 bites the dust
Posted: Mon Oct 19, 2009 6:16 pm
by rbgaz
af rb 60mm crank 6000 miles 26bhp
Re: My RB20 bites the dust
Posted: Mon Oct 19, 2009 11:04 pm
by carlos fandango
rbgaz wrote:af rb 60mm crank 6000 miles 26bhp
??? what do you mean ? its packed up or still going strong ?