Page 2 of 2
Re: Granturismo 200cc piston oversize stockists
Posted: Sun Dec 15, 2019 7:24 pm
by spannerman
holty wrote: ↑Sat Dec 14, 2019 7:45 pm
I presume you have tried Richard taylor ? I think they are a Yamaha piston, maybe banshee ?
Yep talked to Richard,he has given me the info as below , was hoping someone may have the third o/size piston at 66.75. thanks
Re: Granturismo 200cc piston oversize stockists
Posted: Sun Dec 15, 2019 8:08 pm
by spannerman
spannerman wrote: ↑Sat Dec 14, 2019 3:17 pm
Anybody know of who stocks oversize GT200 pistons ,I am at 66.5 (2nd oversize) need a piston at 3rd oversize (66.75) have got 4th oversize (67.0) but that has a slightly different crown height and will now cause me a headache if i use this ,so just putting feelers out
after much looking and advice From Richard Ive had a day to contemplate my way forward,going through TKRJ and PJME catalogues ,it seems there is no piston for the 350LC std other than the DT175k as Richard suggested, but got to bore out to 67.0mm, So looks like thats it . so 2 ways to go, live without gasket or put 110 rod in plus base packer. anybody have any other ideas
Re: Granturismo 200cc piston oversize stockists
Posted: Sun Dec 15, 2019 10:37 pm
by holty
found a Yamaha blaster piston on usa ebay its a wiseco 66.75 that's the size you need I think ?
Re: Granturismo 200cc piston oversize stockists
Posted: Mon Dec 16, 2019 11:46 am
by spannerman
spannerman wrote: ↑Sun Dec 15, 2019 8:08 pm
spannerman wrote: ↑Sat Dec 14, 2019 3:17 pm
Anybody know of who stocks oversize GT200 pistons ,I am at 66.5 (2nd oversize) need a piston at 3rd oversize (66.75) have got 4th oversize (67.0) but that has a slightly different crown height and will now cause me a headache if i use this ,so just putting feelers out
after much looking and advice From Richard Ive had a day to contemplate my way forward,going through TKRJ and PJME catalogues ,it seems there is no piston for the 350LC std other than the DT175k as Richard suggested, but got to bore out to 67.0mm, So looks like thats it . so 2 ways to go, live without gasket or put 110 rod in plus base packer. anybody have any other ideas
holty wrote: ↑Sun Dec 15, 2019 10:37 pm
found a Yamaha blaster piston on usa ebay its a wiseco 66.75 that's the size you need I think ?
thats worth a look at this point in time ,will check it out, cheers