Page 2 of 2
Re: series 2 forks
Posted: Fri Jun 30, 2017 9:03 pm
by li mick
after looking again it seems as though they are LI forks but there is a weld around the tube just underneath the thread on the top although the weld is very good it may mean that there has been a piece cut out at some time to lower the forks.
thanks for your help.
Re: series 2 forks
Posted: Sun Jul 02, 2017 5:23 pm
by li mick
just out of curiosity Paul,what is the difference in the sreies 2 switchgear between the tv and li ?
thanks,Mick.
Re: series 2 forks
Posted: Sun Jul 02, 2017 6:27 pm
by DigDug
li mick wrote:just had another look,they have holes for the rubbers.so not gp.
i'm going out to have another look again
I'd check inside the forks - it's easy to drill holes to fit the bolt in buffers.
Re: series 2 forks
Posted: Sun Jul 02, 2017 8:16 pm
by HxPaul
li mick wrote:just out of curiosity Paul,what is the difference in the sreies 2 switchgear between the tv and li ?
thanks,Mick.
The TV has an ignition switch and the swichgear is similar to a SX or GP.
https://www.flickr.com/photos/ger_oconnell/4733655588/
Re: series 2 forks
Posted: Mon Jul 03, 2017 12:08 am
by li mick
thanks all