Page 2 of 2
Re: Hydraulic route through series 2 headset??
Posted: Thu Apr 06, 2017 9:05 pm
by monkey boy
Thank you very much for your help fellas.
Al
Re: Hydraulic route through series 2 headset??
Posted: Mon May 29, 2017 1:09 pm
by joespeed
nellyboyo wrote:I`ve done it as Corrado says, back through the clamp bolt hole.
Had to use a shorter Allen bolt and I made a short cone-shaped sleeve to spread the load nicely on to that shoulder on the clamp .
I`m away at work so I cant take any pics sorry .
this is what i intended to do but it is very tight, do you have a picture like this through the bolt hole?
Re: Hydraulic route through series 2 headset??
Posted: Wed May 31, 2017 10:56 am
by nellyboyo
No , sorry mate , I`m away at work
Re: Hydraulic route through series 2 headset??
Posted: Wed Jun 07, 2017 7:37 pm
by Bert Oni
Hope it's not too late for you, but try this link to a post of mine from a couple of years back on the very same subject ... some good advice from others who've done it
viewtopic.php?f=7&t=32319&p=239303#p239303
(truth be told, I've still not converted mine, my drum set up is pretty good. I'll prob get around to it one day)
Re: Hydraulic route through series 2 headset??
Posted: Wed Jun 07, 2017 9:40 pm
by joespeed
cheers for the link mr bert oni!