ADS3 vs Franspeed Supertourer

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
servetakid
registered user
Posts: 395
Joined: Tue Feb 22, 2011 9:06 pm
Main scooter: Jet 200
Contact:

drunkmunkey6969 wrote:
alanscottj wrote:...not sure if the ADS3 is on there but they might be useful???
Image



Sent from my iPhone using Tapatalk
I've spent a bit of time looking at this graph and another graph...
I wasn't too impressed with my fanspeed pipe after putting it on my RT230 with 4.8 gearing. Seemed too lack this kick of my NK and doesn't rev on as far. After looking at the two graph, I'm wondering if the RT barrel simply doesn't rev out long enough for me to take real advantage of the pipe. It red lines at about 7000-7500, with NK and the ADS3 having made most of their power by then, but the franspeed is still making power peaks after then. I'm just wondering if the low revving nature of the RT kit actually means that the 'super tourer' doesn't really get the best of kit?

Image
mick1
registered user
Posts: 1292
Joined: Sun Dec 04, 2011 7:43 pm
Main scooter: Li Avanti 225
Location: York
Contact:

Must admit for a "Tourer" the Franspeed looks to be more suited to motorways than hills. I suppose it all depends where you're touring....
servetakid
registered user
Posts: 395
Joined: Tue Feb 22, 2011 9:06 pm
Main scooter: Jet 200
Contact:

mick1 wrote:Must admit for a "Tourer" the Franspeed looks to be more suited to motorways than hills. I suppose it all depends where you're touring....
I would have thought a tourer should be grunty/lower revving, pulling tall gearing up hills and on the motorway.
I'm just wondering if I'm missing out on that second peak and it really doesn't suit my barrel.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests