Scooterotica

Here's the pics you sent me G. Could you tell me what I should be looking at in each picture and what had to be done as well? It looks like you did a very nice job.

ha ...my photography isn't up to much...
because it was hitting the frame and tyre I had to bend the manifold to the centre....
then out from under the mag flange ( that distorted the pipe but probably won't effect the 50 mph top speed..I hope )
that pushed it a fair way out so the mount from the mag flange had to be shortened and bent...
it looks ok on the lui but won't fit inside a j range I don't think..
even now I've only got maybe 10 mm tyre clearance....
very expensive pipe not fit for purpose,,,,
sounds nice though

Clinton Knight wrote:Would love to see the picture.





Here's a picture of the exhaust u-bend.

Clinton Knight

They have a pigeon infestation