Scooterotica

wack 63 that pic of your front set up should be in the tate gallery lol/////

Thank you but it's one I built for a mate.

wack 63 wrote:Thank you but it's one I built for a mate.

Nice neat cap to blank off the original speedo fitting.

corrado wrote:

wack 63 wrote:Thank you but it's one I built for a mate.

Nice neat cap to blank off the original speedo fitting.

I used an oil drain plug but have contenplated one ofthose new anodized alloy ones

Same here, just an oil drain plug.

I got rid of mine.

MB used to sell a bracket for the trailtech speedos which are similar to a SIP ,simple bracket that fitted on the axle on the near side of the disc , a lot more neater than the ones on show here.

The Trailtech one would be no good without being modified as it used a threaded sensor with two nuts

smoore-gt225 wrote:I just did it like this in the end glued the magnet to the disc,
seems to work fine not got to worry about the cable anymore
[url=http://s481.photobucket.com/user/sjmoor ... 4.jpg.html][/url

That's how I did mine.

I run on the cable now though on the sip because I use the magnet for my Gamma.
Sip speedo defo reads higher than the gamma!

If you use the active sensor do you still need to use a magnet for the pick-up?



Sent from my iPhone using Tapatalk