Page 2 of 2
Re: TS1 with TMX30
Posted: Mon Jan 12, 2009 6:53 pm
by soulsurfer
I can only see RAM ones on LTH
Re: TS1 with TMX30
Posted: Mon Jan 12, 2009 7:31 pm
by corrado
soulsurfer wrote:I can only see RAM ones on LTH
Sorry, yes just realised they sell the bellows separately.
http://www.lambretta-teile.de/index.php ... ifold.html
Re: TS1 with TMX30
Posted: Mon Jan 19, 2009 7:24 pm
by soulsurfer
Cam Lam tell me their hose should fit the TMX35 as they've supplied them before and not heard any different, if not, they say I can return it, I'll see later this week.
Re: TS1 with TMX30
Posted: Tue Jan 27, 2009 8:16 pm
by soulsurfer
Tested the TMX30 and LTH manifold with the panels on today and it performed the same as without the panels
Also the Cam Lam filter will stretch over the TMX35 but I don't know about panel clearance with the filter on the LTH manifold but it looks like it will fit with a squeeze.
I guess the question now is whether to run a TMX30 without a filter or a TMX35 with a filter, any thoughts on this appreciated.
Re: TS1 with TMX30
Posted: Wed Jan 28, 2009 1:55 pm
by Dryballs
that's a good question! I like my tmx30 but would prefer to run an airfilter!
I would think a 35 with a filter would be a better bet