Page 2 of 2
Re: Me layshaft
Posted: Mon Jun 29, 2015 9:21 am
by Snails
barnsleybilly wrote:
Lots of patience, shims and pulling through with the nut. Maybe freeze the layshaft to give a nats more clearance is the only mad brainwave I can come up with.
!
Good suggestion, thanks
Re: Me layshaft
Posted: Mon Jun 29, 2015 6:14 pm
by wack 63
I measured an Italian one at 24.98 mm with a micrometer.
Re: Me layshaft
Posted: Mon Jun 29, 2015 6:50 pm
by Snails
wack 63 wrote:I measured an Italian one at 24.98 mm with a micrometer.
Thanks that's really helpful. Mine is also 24.98. Measuring the hole in the bearing I get 24.62. I possibly need to speak to SR then.