Page 2 of 2
Re: 200 engine not revving properly
Posted: Sun May 31, 2015 3:31 pm
by Scootermonkey
Cheers Mick
Re: 200 engine not revving properly
Posted: Sun May 31, 2015 8:42 pm
by olliewtf
definitely put the 266 in there, make sure its av. try it with the x7 needle, and try a 120 main jet. get the jetting right first, then worry about ignition side if problem persists. best of luck!
Re: 200 engine not revving properly
Posted: Sun May 31, 2015 10:11 pm
by Scootermonkey
Yep, I'm going to try that setup in the morning, sounds about right. Cheers