Scooterotica

Thanks for the reply Martin.
The hose has a nut which tightens onto the banjo.
The nut will not pass down the side of the clamp.

I shall try and take a photo.
God knows how you put it up on here. I am not the most gifted when it comes to technology
Robbie

How do i add photos on an android phone

Use tapatalk app it's free

This is my headset.
The hole will not pass by the clamp. Have i built it wrong? Any ideas?
Or should i just undo the clamp fit the cable then reattach the clamp.


Sent from my SM-J320FN using Tapatalk

God im a technophobe...took me ages to navigate tapatalk. Still not really sure what im doing with it.

I've sent a message to the last guy who fitted it this way but from those pics it looks like you'll have to unbolt the clamp to feed it through. Maybe file a groove on the clamp for more clearance.

Thank you again for the reply Martin.
Yeah i have been pondering it.
I wasnt sure if I could grind the clamp a little bit.
I shall unbolt it and try trim a bit off.
Its very tight all the way round and will not fit down the side anywhere...flumming thing.
Hey ho...one step forward two steps back.

I will restore this scooter....if it kills me
Taken 14 years so far

Get the dremmel out & take a bit off the clamp/headset
I’ll add some pictures tonight from my PC

Knew I’d posted b4
Look here should help m8 -> viewtopic.php?f=7&t=38504

Will it not go down the other side,thats were the front brake cable normally goes.