double shimming

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
dapper
registered user
Posts: 930
Joined: Tue Jan 27, 2009 5:30 pm
Main scooter: The Biriani Bullet
Location: Brighton (well Hove actually)
Contact:

Lamaddict wrote:I've shimmed a gearbox with 2 shims, it felt like a bit of a botch but it worked. I would think the gearbox oil would lubricate them and not allow any wearing down.

I opened a Nammer once and it had and about 5 shims in, some made from Coke tins :shock:
Been there, done that :o :oops:
Compact Toolbox Flywheel Holder
Grumpy225
registered user
Posts: 650
Joined: Sat Nov 24, 2012 7:59 am
Main scooter: Gori200, rt195, ld150,rb20
Location: Bakersfield, CA
Contact:

coaster wrote:We are talking about 40 plus year old shopping bikes here not MotoGP :?

Interesting debate though 8-)

They may be old technology but theres no reason you can't build one like a motoGP bike.

:shock:
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Grumpy225 wrote: They may be old technology but theres no reason you can't build one like a motoGP bike.

:shock:
Six per season?? :lol:
CakeAndArseParty
JETEX
registered user
Posts: 38
Joined: Sun Nov 04, 2012 7:08 pm
Contact:

I had an Indian series 2 once, with a 22 mil carb on an 18 mil manifold. Yep, it was adapted to fit with a Coke can. Auto production in India and the Far East would grind to a halt if Coca Cola went bust.
User avatar
GP Kevo
registered user
Posts: 321
Joined: Wed Mar 11, 2009 7:48 am
Main scooter: 1969 150 DL / GP225 TS1
Location: Warsaw
Contact:

With my 40 year old plus shopping bike putting out around 30 hp, I'd want to build mine as close to MotoGP spec as possible. It's not 200 hp so I doubt it would need 6 builds a year.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Amazon [Bot] and 3 guests