Re: Avanti set up
Posted: Wed Apr 09, 2014 10:41 am
I'd try a Dellortocorrado wrote:I'd try a smaller pilot jet.
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Avanti set up
Page 2 of 2
Re: Avanti set up
Posted: Wed Apr 09, 2014 10:42 am
I refuse any Dyno work with these carbs fitted. I don't like them at all.SpanishSX200 wrote:......everything fell apart at the same time. Plating of the slide, jets with pieces falling off, needle worn to not a lot...,.
Re: Avanti set up
Posted: Wed Apr 09, 2014 11:52 am
I was trying to be diplomatic Dan, but ditto
Re: Avanti set up
Posted: Wed Apr 09, 2014 8:33 pm
OAP wrote:......Or you can arrange to call in and I will stack your bike on a test run.
Re: Avanti set up
Posted: Thu Apr 10, 2014 6:01 pm
Ron, no offence meant at all. Wasn't calling your advice into question and I did state that the advice you gave me was from someone who was running a similar carb but did not state that you had set it up. I have good friends who swear by Dellies,, but I have never worked on or used one. I was given the OKO by a mate (who swears by Dellies ) who didn't like it and I did all the mods to try to make it run ok cus I'm tight 
I'll see how things go and report back 
) who didn't like it and I did all the mods to try to make it run ok cus I'm tight I'll see how things go and report back Re: Avanti set up
Posted: Thu Apr 10, 2014 6:53 pm