Scooterotica

its not going to get beyond 88mph without one

Pi$$ take...not helpful really

However - ask for the receipt is good advice.

RB's come into their own at high revs - so at 6K you'll get a kick in the back

Wouldn't buy an older one myself - there were one or two ahem design mods after the initial batch I think.

Ben at AF would say don't buy one that had been run with a stainless tank unless it had been thoroughly ultra sonic cleaned - minute particles destroy the nicasil he says.

Not cheap to replace.

Bon chance!

p155 takers cheers guys should have known better
But thanks for people that have helped with poss input

mcbrid wrote:Pi$$ take...not helpful really

However - ask for the receipt is good advice.

RB's come into their own at high revs - so at 6K you'll get a kick in the back

Wouldn't buy an older one myself - there were one or two ahem design mods after the initial batch I think.

Ben at AF would say don't buy one that had been run with a stainless tank unless it had been thoroughly ultra sonic cleaned - minute particles destroy the nicasil he says.

Not cheap to replace.

Bon chance!

Thanks buddy