Page 2 of 2
Re: which kit for a rally touring px200
Posted: Wed Sep 04, 2013 7:39 am
by H,POOL GADGE
Gizza shout G/eye if and when ye do ye polossi, ye can try me polini alloy 220 and i'll try ye polossi!!!
Re: which kit for a rally touring px200
Posted: Wed Sep 04, 2013 7:58 am
by ArmandTanzarian
goldeneye wrote:... was like a "proper" P200E, if you know what I mean...
That's it exactly. Drives like a P2 should have done from the factory.
Re: which kit for a rally touring px200
Posted: Wed Sep 04, 2013 8:14 pm
by OzOAP
ArmandTanzarian wrote:goldeneye wrote:... was like a "proper" P200E, if you know what I mean...
That's it exactly. Drives like a P2 should have done from the factory.
Yep, same here. My Rally St4 is a great touring machine.
Re: which kit for a rally touring px200
Posted: Wed Sep 04, 2013 11:13 pm
by cezeta
i would not rule out the pinasco 225 with a worb 5 head and pinasco 60mm crank and sip road. not the power of the polini but feels vespa still plus some.
Re: which kit for a rally touring px200
Posted: Sun Sep 22, 2013 10:39 am
by livefast_diefat
I'm looking for a similar kind of engine, a proper rally workhorse and I have been thinking about building a motor based around the Polini ally 210 cylinder and a 60mm crankshaft
Biggest questions are really with regards to crankshaft & packing plates, i.e what is the best to go for?
I'd like to stick to standard induction and preferably a 24 or 26 SI carburettor, if the MB big box exhaust is available in time I will use that, until then a SIP road pipe will be used.