Page 2 of 2

Re: Cyclone fitting

Posted: Tue Aug 27, 2013 5:50 pm
by Timbo
Sam its a great bit of kit and makes riding much more pleasurable. I've not got the best out of my 5th yet but 1-4 are much improved over a standard box. Not cheap but definitely worth the expense if you can afford it.

Re: Cyclone fitting

Posted: Sun Sep 01, 2013 9:42 pm
by Sam_C
Donnie wrote:Have you?
Yes I have, it's in my nearly standard 215 iron barrelled motor and it's an absolute pleasure to ride. Easy to keep in the power band, smooth and no "up and down" between 3rd and 4th (or 4th and 5th in this case) uphill or into a headwind. Try it, you might even like it :D

Re: Cyclone fitting

Posted: Mon Sep 02, 2013 6:32 am
by Donnie
Again, think I'll pass and not because of the hassles and challenges people keep reporting on here of issues with fitting them either, but because my 4 speed already works perfectly well on my Mugello setup and I don't have any desire to spend £500 on something I simply don't need.

There's other things I'd spend that kind of money on for my scooter, in fact that budget will likely sort out a few things I've been thinking of doing to the scooter for some time, including replacing my variotronic with an indian stator / flywheel so I can go fully DC, then upgrade the front headlight, then fit a fuel gauge. Though that'll only come to about £300 so still £200 in my pocket :geek:

Re: Cyclone fitting

Posted: Mon Sep 02, 2013 6:43 am
by Muttley McLadd
Donnie wrote: I don't have any desire to spend £500 on something I simply don't need.
HERESY!!!!

BURN HIM!!

Image

:shock:

Buy some stainless steel, ill fitting, tat, as penance.

Re: Cyclone fitting

Posted: Mon Sep 02, 2013 11:25 am
by DigDug
Donnie wrote:Again, think I'll pass and not because of the hassles and challenges people keep reporting on here of issues with fitting them either, but because my 4 speed already works perfectly well on my Mugello setup and I don't have any desire to spend £500 on something I simply don't need.

There's other things I'd spend that kind of money on for my scooter, in fact that budget will likely sort out a few things I've been thinking of doing to the scooter for some time, including replacing my variotronic with an indian stator / flywheel so I can go fully DC, then upgrade the front headlight, then fit a fuel gauge. Though that'll only come to about £300 so still £200 in my pocket :geek:
You could get a pot of paint Donnie. :shock:

Re: Cyclone fitting

Posted: Mon Sep 02, 2013 11:28 am
by Donnie
I have paint, that's for the fence mate :-)