Page 2 of 2
Re: Malossi Polini swap?
Posted: Thu Jul 25, 2013 5:34 pm
by philhnottm
[quote="Train Driver"]Al did my polini 220cc it still uses the standard carb,auto lube and SiP road exhaust.
I haven't got the dyno sheets but Al said 19bhp & loads of torque, also getting 12 MPL
It made a bit more power using the polini induction but did 7/8 MPL
[/quote
I have the same that Al built for me its OUTSTANDING !! Running JL RH and torque is like nothing ive ever owned .Makes my 210's no fun at all to ride. Mine runs the Polini induction.
Did 12 miles and used 1.66 lts of fuel but big smile on face !!
Given up food to pay form petrol !!
Re: Malossi Polini swap?
Posted: Thu Jul 25, 2013 7:36 pm
by LI150
Are these the old steel barrel or the newer nicasil ones
Cheers Tim
Re: Malossi Polini swap?
Posted: Thu Jul 25, 2013 9:04 pm
by Train Driver
LI150 wrote:Are these the old steel barrel or the newer nikasil ones
Cheers Tim
mine is the iron barrel, Al said he didn't know why as the ports are the same but the ally made more power.
I Loved the induction kit and wasn't that bothered with the consumption it was the running out in the middle of france that bothered me
Re: Malossi Polini swap?
Posted: Fri Jul 26, 2013 8:52 pm
by H,POOL GADGE
http://farm8.staticflickr.com/7368/9373 ... e947_b.jpg
dyno reading - vespa px200e - polini alloy 210-pinasco reprofiled head 10:1-pinasco 60mm crank-24/24si carb 48/100 idle-140 air corrector-be3-125 main-standard 4th gear- carb inlet timing opened-crank inlet timing opened-exhaust port widened a touch -JL r/hander -
pulls like a galloping horse, uphill and head on wind, with a dollup of high rev fun factor, over the moon with setup, 19 BHP + 17 TORQUE!!!
tune, work and dyno cutiously done by the legends DAN & SEAN @ Scootererotica!!!
first time with flickr, i tried!!!
Re: Malossi Polini swap?
Posted: Sat Jul 27, 2013 9:58 am
by paul d
Sounds perfect. I'm shocked it runs ok with only a 125 main jet. It wasn't enough in my brother's polini iron barrel/grand sport/jl but it just goes to show that not every scooter runs well on the same set up, each individual case is different. Enjoy the miles!
Re: Malossi Polini swap?
Posted: Sat Jul 27, 2013 9:12 pm
by H,POOL GADGE
the 125 main was perfect considering the weather/air temp, but a 128 main jet will be going innit, bit rich in summer but right in winter....
me scooter on dyno....
http://www.flickr.com/photos/99493712@N06/9376873485/
Re: Malossi Polini swap?
Posted: Sun Jul 28, 2013 11:26 am
by C*NTSPEED
polini all day for foe me im afraid...no serious porting... revolver rhs pipe and pulls like a train...diablo done me top end but only touched the exhaust port....love it!
Re: Malossi Polini swap?
Posted: Sun Jul 28, 2013 11:07 pm
by joeythescooterboy
Did he raise or just widen exhaust port Joe?
