Page 2 of 4
Re: 5-speed
Posted: Wed Jun 20, 2012 7:04 pm
by Lamaddict
I'd like one but I'm only thinking around the 300 range, otherwise i'll just play about on the SIL200 box
Re: 5-speed
Posted: Wed Jun 20, 2012 8:02 pm
by soulsurfer
Lamaddict wrote:I'd like one but I'm only thinking around the 300 range, otherwise i'll just play about on the SIL200 box
You'll be lucky
Re: 5-speed
Posted: Wed Jun 20, 2012 8:21 pm
by drew2
anyone know what sort of bhp they can handle
Re: 5-speed
Posted: Wed Jun 20, 2012 8:29 pm
by soulsurfer
"The gearbox should take 30bhp, no problem."
Re: 5-speed
Posted: Wed Jun 20, 2012 8:38 pm
by drew2
ahhh,35bhp might be too much then
Re: 5-speed
Posted: Wed Jun 20, 2012 8:45 pm
by soulsurfer
drew2 wrote:ahhh,35bhp might be too much then
I'm not sure I'd trust it in 30bhp, depending on what testing was done and how the 30 figure was gained, I'd need to be convinced, but I'd expect it to be okay in anything under 25bhp.
Re: 5-speed
Posted: Wed Jun 20, 2012 9:07 pm
by tj hooker
no good for me then either . i also heard a well known tuner may make some if theres enough interest
Re: 5-speed
Posted: Thu Jun 21, 2012 6:37 am
by Special X
Sorry, hadn't had access to utube. I assumed a firm like that would at least be showing the speed measuring device. Didn't look very fast really did it?
I do remember thinking as I read the article here we go again, why doesn't my similar set up (different 'box of course) get over 90 mph. That's why the
made an appearance.
5-speed
Posted: Thu Jun 21, 2012 6:57 am
by soulsurfer
I'm corrected that the test bike was the MB iron barrelled TV that Mickey from RLC had in Scootering last month. I'd like to try one if these in my GT kitted bike.
Re: 5-speed
Posted: Thu Jun 21, 2012 11:54 am
by RICSPEED
was it not drt that did c edmonds/camlam boxes ??