Page 2 of 2
Re: 10 min change of studs for SIP rims
Posted: Sat Jun 23, 2012 10:16 pm
by corrado
molibdimum wrote:Anybody know the size and pitch of the left hand thread on the SIP stud . Turns out mine on the rear hub are 1mm smaller so I need a tap
http://scooterotica.org/forum/viewtopic ... ad#p143655
Re: 10 min change of studs for SIP rims
Posted: Sun Jun 24, 2012 9:43 am
by molibdimum
Cheers Martin.
Taking the hub off today and if its a Ramp I think Ill just go with a new hub.
Re: 10 min change of studs for SIP rims
Posted: Sun Jun 24, 2012 12:52 pm
by corrado
molibdimum wrote:Cheers Martin.
Taking the hub off today and if its a Ramp I think Ill just go with a new hub.
Unscrupulous peeps may have ground off the "RAMP" name from inside the hub.
It may not be a Ramp but they're the only ones I've come across so far that use smaller studs than normal.
Re: 10 min change of studs for SIP rims
Posted: Sun Jun 24, 2012 8:27 pm
by molibdimum
It is a RAMP Martin.