Re: speedhut gps speedo
Posted: Tue Feb 07, 2012 9:21 pm
Is there anyone on here with a CNC/ lathe who can make me a ring for my headset please.........?
speedhut gps speedo fitted to craigs bike by mark & anne's photos, on Flickr
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
speedhut gps speedo
Page 2 of 3
Re: speedhut gps speedo
Posted: Wed Feb 08, 2012 9:30 pm
Re: speedhut gps speedo
Posted: Wed Feb 08, 2012 10:46 pm
Looks nice Mark
Dean
Re: speedhut gps speedo
Posted: Wed Feb 08, 2012 11:42 pm
It looks very tidy Mark. All you need is the snow to melt, and then you'll find out if it works.
Re: speedhut gps speedo
Posted: Thu Feb 09, 2012 9:57 am
It will work Martin. Have faith
Re: speedhut gps speedo
Posted: Sat Feb 11, 2012 12:37 pm
Where are you sticking the magnetic sender mark?
Re: speedhut gps speedo
Posted: Sat Feb 11, 2012 1:10 pm
Under the horn cast initially
Re: speedhut gps speedo
Posted: Sat Feb 11, 2012 4:28 pm
Like the levers Mark, whats the story with them?WINTERMODEL150 wrote:Looks nice Mark
Dean
ta
Re: speedhut gps speedo
Posted: Sat Feb 11, 2012 6:34 pm
Not my bike sef but it is fully hydraulic
Re: speedhut gps speedo
Posted: Wed Mar 14, 2012 10:54 am
Update on this setup.
It seems to pick up satellites perfectly, I have fitted the sensor under horncast and wired the hot start connection into the loom before ignition so it gets a permanent feed to track satellites , turn ignition on and it runs thru the speedo start up procedure( 20-30seconds) and is ready to go by time you started bike. Hopefully road test next week
It seems to pick up satellites perfectly, I have fitted the sensor under horncast and wired the hot start connection into the loom before ignition so it gets a permanent feed to track satellites , turn ignition on and it runs thru the speedo start up procedure( 20-30seconds) and is ready to go by time you started bike. Hopefully road test next week