Page 2 of 5
Re: GORI exhaust
Posted: Wed Oct 12, 2011 5:57 pm
by Eibar
check the mating flange on the u bend , we have one here thats not straight at all and thats pretty s**t for a £300 pipe. The outer edges of the flange were the studs go through are flat enough but there;s a BIG dip in the middle section that blew the mb gasket out.
Re: GORI exhaust
Posted: Wed Oct 12, 2011 6:20 pm
by mods64
cheers mate for the info .
Re: GORI exhaust
Posted: Thu Oct 13, 2011 5:15 pm
by shocky
Eibar wrote:check the mating flange on the u bend , we have one here thats not straight at all and thats pretty s**t for a £300 pipe. The outer edges of the flange were the studs go through are flat enough but there;s a BIG dip in the middle section that blew the mb gasket out.
that is a problem with alot of u bends i alway flat mine down in the same way yoy "lap" a head down on SMOOTH FLAT SURFACE WITH EMERY PAPER AS AN ABRASIVE
Re: GORI exhaust
Posted: Sun May 06, 2012 12:00 am
by Lamaddict
Anymore feedback on these exhaust especially the bigger one with the mini muffler on the end? Where are they available from?
Re: GORI exhaust
Posted: Sun May 06, 2012 12:12 am
by Train Driver
Wait till early next year for the Mb/bgm clubman, aren't gori making a new pipe soon
Re: GORI exhaust
Posted: Sun May 06, 2012 12:26 am
by soosh
Early next year? Thought they were available soon.
Re: GORI exhaust
Posted: Sun May 06, 2012 12:03 pm
by jonnyb
Andy at Gori shipped my new race exhaust on Wednesday this week.
Supposedly more power and less noise than the previous gori race, can't really be noisier than my af nk pipe and with better ground clearence than my nk as well
Re: GORI exhaust
Posted: Sun May 06, 2012 2:28 pm
by Lamaddict
Who is Andy, is he from Mito where I think the exhausts come from? How much are they? I'm kind of waiting for the new MB Clubman but the Gori seems close on performance from what MB wrote on their great tech site.
Re: GORI exhaust
Posted: Sun May 06, 2012 3:51 pm
by dodobeckam
i`m running 48mm gori on ts1 with mikuni tmx 35...no problem with mine done about 3000 miles..I was using franspeed 3 and changed to the gori for a more standard look,obviousely I lost power but it still moves....
Re: GORI exhaust
Posted: Sun May 06, 2012 8:22 pm
by jonnyb
If you contact Gori directly through their website Andy is the guy that will get back to you, nice chap and possibly a freind of the family from what I have learnt from the few emails back and forth, I've waited a few weeks for the exhaust to be made and he's kept in touch throughout.
I remember it cost about £280 sterling or 330 Euro including shipping.
I'm expecting similar performance to the Ancillotti that I had fitted before my NK pipe but am hoping I'll be pleasently surprised