Scooterotica

Donnie wrote: At issue.
Would condensation be a problem though?

Bless you.

Nah, condensation wouldn't be a problem. A vent to somewhere dry would be pretty easy.

good point.

Stampede wrote:Already got the box mounted to one of my scoot, i like it. don´t think your electrics will get wet in their, it´s mounted above the muadguard.

love to see a photo to see the clearance etc as its hard to visualise it as scootercentre dont give measurements or anything or have a pic of it in position.

Donnie wrote:love to see a photo to see the clearance etc as its hard to visualise it as scootercentre dont give measurements or anything or have a pic of it in position.

no problem, could take one this evening. :bouncing:

Oh, here´s one in the GSF, where the box was developed:

http://www.germanscooterforum.de/findpo ... 02277.html

can you see the pics?

big fecker ain't it?
Surprised no ones fitted it to the other side?
any reason?

timexit17 wrote:big fecker ain't it?
Surprised no ones fitted it to the other side?
any reason?

the shock absorber

Stampede wrote:Already got the box mounted to one of my scoot, i like it. don´t think your electrics will get wet in their, it´s mounted above the muadguard.

Can you post a pic of the toolbox fitted to the scoot, would ike to see it in situ...ta

I remember some years ago someone making up a metal box with a lid that went on the battery tray. I think it was Jimmers, but I'm not sure.

sydduckett wrote:

Stampede wrote:Already got the box mounted to one of my scoot, i like it. don´t think your electrics will get wet in their, it´s mounted above the muadguard.

Can you post a pic of the toolbox fitted to the scoot, would ike to see it in situ...ta

You can find some pics in the GSF in the link above!

Stampede wrote:

sydduckett wrote:

Stampede wrote:Already got the box mounted to one of my scoot, i like it. don´t think your electrics will get wet in their, it´s mounted above the muadguard.

Can you post a pic of the toolbox fitted to the scoot, would ike to see it in situ...ta

You can find some pics in the GSF in the link above!

Ta, for me this looks like a really good idea. I run a spare wheel inside the leggies so therefore a leggy tool box is no good. Sometimes struggle getting Putoline bottles in the toolbox so the abilty to get 2 litres of oil or one litre and some of the larger tools is a real bonus. To be honest id probably padd it out for a spare oil bottle and some tools which would free up space to get the putoline in.....

The only down side seems to be that you would have to take approx 5 nuts off which all seem quite accesible....