Page 2 of 2
Re: fuel gauge senders to fit in a lammy tank
Posted: Sat Apr 23, 2011 10:29 pm
by Bilko
Good work Mark. Wouldn't mind a fuel gauge one day
Re: fuel gauge senders to fit in a lammy tank
Posted: Sat Apr 23, 2011 11:15 pm
by AUSSIE
Mark you are correct about the vapour not having a fuel gauge. but MB now do a koso digital speedo with all the features and a fuel gauge.
I really should study the discriptions more..lol
Re: fuel gauge senders to fit in a lammy tank
Posted: Sun Apr 24, 2011 10:46 am
by DJB
Re: fuel gauge senders to fit in a lammy tank
Posted: Sun Apr 24, 2011 11:17 am
by Monty
I picked up a Kawasaki GPX600 sender off ebay for 5quid
My tank is a remade one without baffles so loads of room
a 25mm hole just to the side of the strap with 4 clench nuts, bolts it to the top of the tank. The float arm runs across the tank. I do like the one mark has done, very neat and will work with baffles.
I did have to change round the wire wound resistor as the gauge needed 0 Ohms to show full. It originally was O for empty 100 Ohms full.