Page 2 of 2
Re: another tubeless disaster......front end this time.
Posted: Sun Feb 27, 2011 9:28 am
by soulsurfer
corrado wrote:I thought that Frank Sanderson at Lambretta Innovation did one but I couldn't find it on his website .......... FRANK!!!!!!
Here you go Martin...
https://www.pmtuning.co.uk/Merchant2/me ... 1LAMBRETTA
Re: another tubeless disaster......front end this time.
Posted: Sun Feb 27, 2011 10:03 am
by Muttley McLadd
That's just off a piaggio zip, isn't it?
Re: another tubeless disaster......front end this time.
Posted: Sun Feb 27, 2011 10:10 am
by mark
yes
anti dive front end by
mark & anne's photos, on Flickr
someone was selling the caliper brackets on ebay a couple of months ago
Re: another tubeless disaster......front end this time.
Posted: Sun Feb 27, 2011 10:14 am
by soulsurfer
Zip 50, probably the best compromise out there though.
Looks good Mark
I must say I much prefer the Grimeca caliper to the Nissin offering, don't you?
Re: another tubeless disaster......front end this time.
Posted: Fri Mar 04, 2011 10:31 am
by lamblast
i did a bit of research into the valves and its not just us it is happening to its been happening in the states to autos from what i can remember its a worldwide thinge the valves are poorly designed with very little rubber touching the valve and no lip on the metal bit to stop the metal piece coming out i suspect very strongly the bikeit valves are from the same company as well i still run mk1 rs rims with bolt in valves with no issues i also run mk3 with the rubber one but am in the process of changing to bolt in