Page 2 of 2
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 5:07 pm
by red
Have a look on here mate.
http://www.flickr.com/photos/members-scooters/
Scunthorpe Silhouettes Lambretta Club
Some of these scooters have rear footpegs.
If these are of any use to you let me know and I'll go and get some better pictures when I can
Cheers
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 5:26 pm
by Bilko
red wrote:
Where was your finger?
The Middle of your Football club
Byron was right about the rear struts being too far back.
Those pictures are superb Red, but they all seem to have they're rear pegs coming off the rear struts. That's too far back.
The only option I can think of, is those wee jobbies off Beedspeed
Would they be strong enough?
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 5:32 pm
by red
Bilko wrote:red wrote:
Where was your finger?
The Middle of your Football club ; :biggrin: )
Byron was right about the rear struts being too far back.
Those pictures are superb Red, but they all seem to have they're rear pegs coming off the rear struts. That's too far back.
The only option I can think of, is those wee jobbies off Beedspeed
Would they be strong enough?
Just look cheap and nasty!!
Suit you down to the ground then
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 5:49 pm
by Bilko
Cheeky fecker!
I meant the brackets, not the footpegs.
I can't think of anything else & I don't know anywhere else that does anything that would suit.
So any help would be greatly appreciated. I'm after something neater & better than the Beedspeed option.
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 6:35 pm
by byron
Bilko wrote: I'm after something neater & better than the Beedspeed option.
I think mine are. some pics on
this thread
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 7:17 pm
by Bilko
Yours are exactly what I'm after Byron (except the brake bit), but I don't have the ability or facilities to make them.
Do you mind me asking where I could get a set?
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 9:51 pm
by byron
Bilko wrote:Yours are exactly what I'm after Byron (except the brake bit), but I don't have the ability or facilities to make them.
Do you mind me asking where I could get a set?
I made them myself; it was the best way to get them positioned where required and looking like i wanted.
Hanging from Scooter Loopy John exhaust clamp brackets.
Re: Rear Footpegs?
Posted: Sun Dec 13, 2009 10:56 pm
by Bilko
I've been trying to come up with something more than just a bracket like the one from Beedspeed for weeks and I've got nowhere.
If there's someone out there willing to make me some I'd be really grateful. I'm not looking a freebie. (Obviously I'll pay for them)