Page 2 of 2

Re: fitting a franspeed rhaust help neededace ex

Posted: Wed Sep 15, 2010 1:17 pm
by Bilko
Thanks. If this friggin rain eases up today I'll give it a go. I was worried about the big gap and the pulling back stress because of it being off centre

Re: fitting a franspeed rhaust help neededace ex

Posted: Wed Sep 15, 2010 7:43 pm
by ricalnic
not the best pics but here goes, hope this helps. hopefully you can see that the bracket from the front of the chaincase is in front of the one coming up from the expancion part.

Image

Image

Image

Image

Image

Re: fitting a franspeed rhaust help neededace ex

Posted: Wed Sep 15, 2010 7:46 pm
by Bilko
Cheers. I'll have another look tomorow, (if i get a chance between the rain showers).

Re: fitting a franspeed rhaust help neededace ex

Posted: Thu Sep 16, 2010 7:12 pm
by Bilko
Here's my fitting :(

Image

Had to drill a new hole in the upper half of the fixing bracket for the tailcan to fit.

Image