Page 2 of 2

Re: Reverse cone with VW silencer

Posted: Sun Feb 15, 2009 9:15 am
by stew
Are they that bad, or are we all a bunch of old farts. I had a go on one today and it didnt seem much different to my JL3.

Stew

Re: Reverse cone with VW silencer

Posted: Sun Feb 15, 2009 4:59 pm
by Scootissimo
Definitely get one. They're cracking.
Just as long as you don't mind upsetting the neighbours.

:roll: :D :roll:

Re: Reverse cone with VW silencer

Posted: Sun Feb 15, 2009 6:15 pm
by J1MS
If my memory seves me well, Ray Kemp was blasting round ahead of nearly everything on scooter wheels using a reverse cone big bore exhaust on his Group 6 race scooter, didnt seem to slow him down much......But was it loud :shock:

Re: Reverse cone with VW silencer

Posted: Sun Feb 15, 2009 6:51 pm
by Andy Pickering
I remember all the neighbours down our street when i was a kid knocking on my parents door complaining about my older brother on his sx200 with clubman (vw) and the noise...we lived down a small closed street and he would come in late on a night and as he turned into our street he would open it out full and he had a 30mm dell on as well, i thought it well funny...it used to echo down the street and make the tele go fuzzy....good days :lol: :lol: :mrgreen:

Re: Reverse cone with VW silencer

Posted: Sun Feb 15, 2009 10:55 pm
by Muttley McLadd
stew wrote:Are they that bad, or are we all a bunch of old farts. I had a go on one today and it didnt seem much different to my JL3.

Stew
Eh?? CAN YOU SPEAK UP? I CAN'T HEAR YOU.. :lol:

Re: Reverse cone with VW silencer

Posted: Mon Feb 16, 2009 11:28 am
by paul213
If you get the ones with the clamp in tailpipe . you just need another tailpipe for the mot take out the inner crimp it in a vice to reduce the size a bit more packing then replace into outer a couple of pinches round the bottom to hold it all together and refit , only use it for the mot or your motor will over heat ,plus it runs like a bag of sh1t . but means you dont have to change your pipe . always worked for me
paul

Re: Reverse cone with VW silencer

Posted: Mon Feb 16, 2009 12:43 pm
by Furious George
paul213 wrote:If you get the ones with the clamp in tailpipe . you just need another tailpipe for the mot take out the inner crimp it in a vice to reduce the size a bit more packing then replace into outer a couple of pinches round the bottom to hold it all together and refit , only use it for the mot or your motor will over heat ,plus it runs like a bag of sh1t . but means you dont have to change your pipe . always worked for me
paul

cheers Paul, good tip.