NSU Prima D

If you want to tell us about or ask about a standard spec or restoration project....post it here.
OliverCiaravella
registered user
Posts: 14
Joined: Sun Mar 14, 2021 10:21 pm
Main scooter: NSU Prima D
Contact:

Hey all

So renovation of my NSU Prima D is coming on well all stripped down engine un-seized and with the garage being cleaned and checked.

Frame all sanded down and resprayed just waiting for engine to get back and can can’t rebuilding.

I do have a couple of questions:

I have a Draper grease gun but I can’t seem to find a connector or collection of connectors to convert the gun to the grease nipples. The grease gun is this one: https://www.toolstation.com/draper-14-a ... gun/p41605

And I have attached a picture of one of the grease nipples

Also what grease would be recommended for the forks bearings and steering bearings?


Sent from my iPhone using Tapatalk
OliverCiaravella
registered user
Posts: 14
Joined: Sun Mar 14, 2021 10:21 pm
Main scooter: NSU Prima D
Contact:

Image
Picture didn’t attach


Sent from my iPhone using Tapatalk
storkfoot
registered user
Posts: 1154
Joined: Thu Jan 08, 2009 12:08 am
Main scooter: '70 GP150 [TS1 225]
Location: Merseyside
Contact:

I am unfamiliar with the grease gun you refer to. Many years ago, I bought an antique grease gun for not much money. I have just done a search and you can still pick up similar for not much money. I have never had an issue with it fitting Lambrett grease nipples which, I would guess are a very similar size.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 11 guests