Throttle cable
Hi all, Italian gp, outer cable on the top keeps coming out of the retaining guide, have taken horncase etc off & cable tied at various locations with play for movement etc but pops out when turning handle bars side to side. Any pointers/ tricks, cheers in advance
This is usually caused by poor routing of the cable. Look closely at how it's been done.
Also avoid cable tying onto the steering tube above the horn bracket area. As ties up high pull the cable(s) out. They need to have some free twisting movement.
Also avoid cable tying onto the steering tube above the horn bracket area. As ties up high pull the cable(s) out. They need to have some free twisting movement.
Cheers for the reply, will have a closer look at the weekend