Steering Dampener brackets about to be welded on by Alex (TKC)
Hes a CLEVER f@@ker and a great fabricator.
Little Beastie
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
Rear Seat Mount lightened by Alex
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
Alex Made a New spacer to the correct size
So instead of this.....
I have this
So instead of this.....
I have this
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
New Rear Swing Arm Sorted
Alex has made this a lot stronger for me whilst still being very light.
Its that strong that the frame will now flex under power so additional bracing is required there now too
Alex has made this a lot stronger for me whilst still being very light.
Its that strong that the frame will now flex under power so additional bracing is required there now too
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
Yeah its looking good now. Everything is strong as well as being nice and light.
Were well behind schedule for this year but nearly there now. Hopefully, fingers crossed another 6 - 8 weeks and it'll be finished
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
You cant beat a good weld can you! I'd gladly take the praise but cannot. Its my mate Alex at The Car Kitchen that is welding everything. I just gave him the instructions, Hes carrying out the work. Hes nearly finished now so I should have some more pics to show and then its final touches, dyno session then sprinting here we come
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
A couple of Brackets made by Alex
And the Radiator is in place
And the Radiator is in place
Stay tuned..............
-
- registered user
- Posts: 345
- Joined: Wed Jan 07, 2009 12:52 pm
- Main scooter: Vespa 50 Special (Rotax Proto)
- Location: Rothwell, Northants
- Contact:
New inlet made and in situ, Excuse the PWK copy, it'll get replaced soon
Stay tuned..............