Rear hub stud sizes

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
tavspeed
registered user
Posts: 276
Joined: Mon Jan 12, 2009 8:58 pm
Contact:

Wed Jun 27, 2018 11:52 pm

Had some sip tubeless rims to fit for a mate
Wound out the existing studs. No problems but couldn’t get the sip studs to wind in measured them with verniers sip measure 10mm on the left hand part the original ones 8.7mm
has he got a oddball hub or are the sip studs wrong

tavspeed
registered user
Posts: 276
Joined: Mon Jan 12, 2009 8:58 pm
Contact:

Wed Jun 27, 2018 11:57 pm

Rear hub havent tried front hub yet

User avatar
garry inglis
registered user
Posts: 1226
Joined: Tue Jul 21, 2015 8:04 pm
ebay user ID: garry52uk
Main scooter: ts1 230 and rb200
Location: darlington
Contact:

Thu Jun 28, 2018 5:17 am

I have two sets of sip wheels and the studs just went in as normal if one of your mates has a spair wheel he should have spare studs try them for size

Sent from my SM-A320FL using Tapatalk


Minority
registered user
Posts: 693
Joined: Wed Feb 01, 2012 2:00 pm
Main scooter: Li230 S3
Location: Perth, Western Australia
Contact:

Thu Jun 28, 2018 5:38 am

Standard thread size 10 x 1 (left hand), sounds like you have an odd size hub. :(

dennis
registered user
Posts: 293
Joined: Mon Jan 16, 2012 8:17 pm
Main scooter: 1 gp 1 special
Contact:

Thu Jun 28, 2018 5:01 pm

sounds like it's a ramp rear hub,they are smaller stud threads.

User avatar
Burnside
registered user
Posts: 263
Joined: Wed Feb 22, 2012 9:22 pm
Main scooter: Lambretta TV200
Location: Norwich
Contact:

Fri Jun 29, 2018 10:49 am

dennis wrote:
Thu Jun 28, 2018 5:01 pm
sounds like it's a ramp rear hub,they are smaller stud threads.
If it is a Ramp hub I'd ditch it straight away

Post Reply Previous topicNext topic
  • Information