PX200 tuning

Anything related to Vespas... ask tech questions, post helpful info, or just read and learn.
Norrie Bodge
registered user
Posts: 450
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: GP-1971-Ts230/S2-1960-Ts230
Contact:

Yes chippers!!
I remember fitting the topend after he seized it up but sure it was just all standard ?
RGC GEOFF
registered user
Posts: 24
Joined: Tue Jan 05, 2016 8:08 pm
Main scooter: Vespa GTr BGM 190
Contact:

Here are some pics of my stage 4

Image

Image

Image

Image

Image
Built not bought...
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

I love the crown work for additional transfer timing :)
paul d
registered user
Posts: 305
Joined: Thu Jun 30, 2011 10:00 am
Main scooter: T5 172 Tv 240
Location: Galway Ireland
Contact:

Like the lightened clutch and the filling in of the transfers, barrel painted black, the small details. Work of art!
RGC GEOFF
registered user
Posts: 24
Joined: Tue Jan 05, 2016 8:08 pm
Main scooter: Vespa GTr BGM 190
Contact:

Built not bought...
Norrie Bodge
registered user
Posts: 450
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: GP-1971-Ts230/S2-1960-Ts230
Contact:

Who did the tuning 4u Geoff?
& what does it perform likes?

What’s your full setup??
RGC GEOFF
registered user
Posts: 24
Joined: Tue Jan 05, 2016 8:08 pm
Main scooter: Vespa GTr BGM 190
Contact:

I do all the engines myself Norrie.
Performs for the moment I don't know; I finished the engine last week and my frame is not ready yet, still at the paint job.

set up is on a SI 24/24 E : idle 60/160
air corrector 140
Atomiser BE1
Main jet 138
Slide n°4 old model without pocket.

air filter p200 non drilled but will be replaced by T5 's one + Pinasco airbox

Exhaust will be a Sterling 200
Built not bought...
Norrie Bodge
registered user
Posts: 450
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: GP-1971-Ts230/S2-1960-Ts230
Contact:

RGC GEOFF wrote: Fri Jan 12, 2018 7:46 pm I do all the engines myself Norrie.
Performs for the moment I don't know; I finished the engine last week and my frame is not ready yet, still at the paint job.

set up is on a SI 24/24 E : idle 60/160
air corrector 140
Atomiser BE1
Main jet 138
Slide n°4 old model without pocket.

air filter p200 non drilled but will be replaced by T5 's one + Pinasco airbox

Exhaust will be a Sterling 200
im impressed m8, sounds & looks good ;-)
done a few bits of tuning on me own P200E over the years.
be great if you can add how it goes once all built & ran in m8
RGC GEOFF
registered user
Posts: 24
Joined: Tue Jan 05, 2016 8:08 pm
Main scooter: Vespa GTr BGM 190
Contact:

No problem, I will.
Built not bought...
Norrie Bodge
registered user
Posts: 450
Joined: Thu Oct 25, 2012 2:49 am
Main scooter: GP-1971-Ts230/S2-1960-Ts230
Contact:

@ RGC GEOFF .... any further reports to how this P2 tune performs mate ?
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 7 guests

cron