Rotax 300 builld

Anything related to Lambretta or Vespa Scooters fitted with LC, Motorcycle and/or Auto engines!
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

After spending a couple hours reposting all my images via flickr, hopefully everything is back up after the debacle with Photobucket. Finger's crossed that we won't have to go through that again!

Anyways, took a few trips 'round the block with the A/F Meter installed and it seems to be reading quite accurately. Looks like we're a little lean in a few spots, so it's time to bust out the jet kit and start tunin'.

Been trying to shoot some decent video, but what I end up with is pure crap so I'm working through that but promise to have something up shortly.
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

OK! Here's a rough video of the Rotax Lambretta on the road...

[youtubeshare]https://youtu.be/T2aIfAJR68s[/youtubeshare]

Hope to make the North Vs. South ride this weekend...

Sorry for the jump, tried to embed the video but couldn't figure it out...
holty
registered user
Posts: 908
Joined: Wed Jul 15, 2015 11:52 pm
Main scooter: lambretta gp
Location: east yorkshire
Contact:

nice one ryan, it sounds very nice, looks fun to ride as well, soon gets through the gears, is it run in now ?
Adam_Winstone
registered user
Posts: 1693
Joined: Tue Jan 31, 2012 8:54 pm
Main scooter: Lambretta GP
Contact:

Looks good :)
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

It's 'run in' as much as it's going to get before I start thrashing on it. Too many of you hot on my heels! Next step, EFI!

Holty, how's yours coming along?

Thanks Adam! It's fun as well!
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

Made the trip up to Malibu for the North Vs South campout last weekend. Great ride through the Malibu canyons and was an awesome opportunity to put the bike through its paces.

The bike performed flawlessly, which was a great surprise as I haven't had much of a chance to shake the thing down otherwise. Tried to put it through the motions as much as possible to see if I could locate any weak links, but aside from a pipe bolt backing out that's been an existing problem, my to-do list for this project is very short. Time to ride!

Thanks to Diego and all the Black Sheep!

ImageNorth V South 2017 by PotvinV8, on Flickr
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

Got a dyno date penciled in for Tuesday and will be spending the next day or so in preparation. Should be interesting to see what it makes. I know there are a few things I'm a bit pessimistic about, so it should be intriguing to see if those things have any effect on the final numbers. Let's just hope it stays together! I'll be happy with that, regardless of the result!

Who wants to throw around some numbers as a guess? The stock 583cc Skidoo engine makes a tick over 100hp, so if we can get anywhere near half that, we're doing REALLY good given that engine is tuned from the factory to make those numbers and my bike was tuned from my shed to barely run.

I'm thinking anything over 30hp / 25 lbft would be a success...

I'll post our results here.
User avatar
RManson
registered user
Posts: 211
Joined: Fri Aug 31, 2012 4:40 am
Main scooter: Jet 200
Contact:

Well, things started off promising.

ImageIMG_6131 by PotvinV8, on Flickr

Then this happened...

ImageIMG_6136 by PotvinV8, on Flickr

ImageIMG_6145 by PotvinV8, on Flickr

ImageIMG_6141 by PotvinV8, on Flickr

Back to the drawing board!
User avatar
Stampede
registered user
Posts: 224
Joined: Wed Jan 07, 2009 5:07 pm
Main scooter: SX200
Location: Landsberg, Germany
Contact:

Do you know the reason for the breakdown?
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

RManson wrote:Well, things started off promising.

ImageIMG_6131 by PotvinV8, on Flickr

That looks like a decent dyno setup, who/where is it?
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 5 guests