Can anybody recommend an exhaust (original Ancillotti style) that will fit to a 186 Mugello? The lame is a series 3 Li 1962. I would like something that is fairly straight forward to fit and will not mean any tinkering with setup. If possible fit and go. As you may have gathered I am not very mechanically minded but willing and able to remove the PM tuning one currently fitted and refit the new one.
Cheers
Paul
Exhaust for Mugello 186
42/48 mil clubman I find works well with the Mugello kit.
-
- registered user
- Posts: 1154
- Joined: Thu Jan 08, 2009 12:08 am
- Main scooter: '70 GP150 [TS1 225]
- Location: Merseyside
- Contact:
I ran a Mugello several years ago with both an AF Clubman and, later, a PM like you. The PM was not enjoyable. Forever slipping the clutch. It was much more enjoyable to ride, even long distances, with the Clubman.
I suspect I am just endorsing what you too have found out
You will definitely need to alter your carb jetting though.
I suspect I am just endorsing what you too have found out
You will definitely need to alter your carb jetting though.
-
- registered user
- Posts: 796
- Joined: Sat May 28, 2016 4:51 pm
- Main scooter: Lambretta LI 125 S3
- Location: Skaville
- Contact:
Scootopia clubman on my Mugello, well made and perfect fit.
-
- registered user
- Posts: 166
- Joined: Thu Feb 26, 2015 1:29 pm
- Main scooter: Lambretta S3 Li150
- Location: Coventry
- Contact:
Thanks for the replies. I have looked at all of the suggestions. My preference would be the scootopia based on what I've read. I have only found one supplier that has stock so may just order that £100 plus P&P. I have also considered the BGM clubman but I can only find it unpainted. A job I don't mind doing but I've read that they are still liable to corrosion. Plus they are pricey. I would need to get someone to re-jet for me but I know a few guys that could bail me out.
-
- registered user
- Posts: 166
- Joined: Thu Feb 26, 2015 1:29 pm
- Main scooter: Lambretta S3 Li150
- Location: Coventry
- Contact:
I have ordered the Scootopia Clubman. Hopefully it is as straightforward to fit as all I have read. I am not that concerned about any improvements to performance as the scoot runs pretty well with no issues in the two years I have owned it. I just want to get it back to looking as original as possible. Thanks for all the replies, recommendations and advice.
Blenks
Blenks
-
- registered user
- Posts: 796
- Joined: Sat May 28, 2016 4:51 pm
- Main scooter: Lambretta LI 125 S3
- Location: Skaville
- Contact:
There was an article on clubman pipes in last months scootering mag that featured the Scootopia pipe, worth looking at at it faired very well, be interesting to see how the BGM compares this month.