Series 2 Handlebar
-
- registered user
- Posts: 107
- Joined: Sun Jan 26, 2014 11:30 pm
- Main scooter: Tv175 S2- Li 150 S2 Eibar
- Contact:
The throttle part of the handlebar is loose on my series 2. By loose I mean there's quite a lot of play side to side. Before I start taking things apart is there any parts that could be worn in this area?
Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
-
- registered user
- Posts: 859
- Joined: Mon Jul 07, 2014 10:34 am
- Main scooter: lambretta li 125
- Location: Tyne and Wear
- Contact:
Except on the throttle wheel.cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
hendy wrote:Except on the throttle wheel.cgt75b wrote:Hi
It probably just needs a few spacers between the olive and the brass gear change wheel.
Hope that helps
Cgt75b......................
Oh s**t 4.00 am starts not good
-
- registered user
- Posts: 107
- Joined: Sun Jan 26, 2014 11:30 pm
- Main scooter: Tv175 S2- Li 150 S2 Eibar
- Contact:
Cheers Guys. The play I have is on the throttle side. Sorry for the vagness in my original post. I have now taken the grips off and I can see wear on the inner throttle rod. The rod inside has worn away which inturn has left play for n the outer throttle handle.