Hi, we are trying to set up a rear facing carb on a quattrini M1XL.
We have tried to fit a Dellorto PHBH 30mm to the stock reed mount, but it won't fit.
Is there a special manifold rubber to suit Dellorto style carbs? Or is there an alternate solution for the manifold?
This is for an event scooter for an April 2016 event - would love to get it road tested well before then!
Hope someone can help with good advice.
Jess
Reed mount quattrini - what carb to use?
- wack 63
- registered user
- Posts: 1254
- Joined: Fri Nov 27, 2009 9:33 pm
- Main scooter: '71 GP TS1
- Location: Lincs
- Contact:
Try the Smallframe forum, http://vespasmallframeforum.proboards.com
-
- registered user
- Posts: 467
- Joined: Tue Feb 04, 2014 10:35 am
- Main scooter: 1975 Vespa Rally 200 Femsa
- Location: Durham, England
- Contact:
I use a Delly PHBH 30 on mine & it fits the standard Quattrini manifold without any problem... think I used one of the SIP Serie Pro manifold rubbers for 30mm carb - like this one; http://www.sip-scootershop.com/en/produ ... +_22301500
Untitled by Graham Dent, on Flickr
Untitled by Graham Dent, on Flickr