Great, looking forward to the results of your JL3 VS TSR test!Minority wrote:Pretty sure the NK used in this test would be the "road" version and the Franspeed Supertourer is not too dissimilar to the NK (according to the graphs on Andy Francis website).
As you say the results for the TSR are pretty impressive, especially for the price!
Just replaced my JL3 with the TSR EVO, so hoping for good results when jetted in.
TSR Evo pipe
-
- registered user
- Posts: 246
- Joined: Sat Dec 29, 2012 5:07 pm
- Main scooter: Lambro, GP.
- Contact:
LOL, Didn't know which areas do or don't but was aware that dyno facilities are far flung. Must say, it looks the part though, v. smart. I'm sure no one would mind a duplicate picture in this thread, seeing it's the pipe discussed SMinority wrote:B-Race Tuning wrote:Could you put up a dyno graph of that once done, Minority? If dyno'd of course. Simon.
Dyno, in sunny Western Australia. It's good old plug chops for us colonials in Perth!
Seriously, I'd love to get it dynoed, just not available here Simon.
In the Vespa world, TSR is popular for the Revolver, the asian replica of the JL Righ hand. I remember scootering making a comparison between the 2 (among the many they tested).
But this seems to be different especially if Marco Rentzmann was involved into the pipe development like the say on their webpage.
Let's wait and see...
Very cool pic by the way!
But this seems to be different especially if Marco Rentzmann was involved into the pipe development like the say on their webpage.
Let's wait and see...
Very cool pic by the way!
-
- registered user
- Posts: 673
- Joined: Wed Feb 01, 2012 2:00 pm
- Main scooter: Li230 S3
- Location: Perth, Western Australia
- Contact:
Time will tellJazzy wrote:
How did you get on with the "Missing" end can bracket.
However the distance from the cone to the can is shorter than most and is heavily braced.
Sorry should have clarified colours of the TSR & NK are similar:
NK is the road pipe which shows the 2nd highest BHP
JL is the Franspeed Race, in Green top BHP
Clubman is the prototype superclubman
TSR is showing up in 3rd
NK is the road pipe which shows the 2nd highest BHP
JL is the Franspeed Race, in Green top BHP
Clubman is the prototype superclubman
TSR is showing up in 3rd
What the Graph shows is they are all excellent pipes, With different Characteristics. and require different gearing to get the best.
Ive ridden the bike (well it is mine) with the super clubman and although it doesn't look much on the graph, compared to the others its an absolute delight to ride. always in the power however few revs you're pulling and if i were to ride on my own across Europe and the alps this would be my choice.
When it doesn't have the Case Induction engine, in I have the Nk road. great pipe once you get used to the lack of rev on. the TSR evo looks like it will give some of that at the loss of a little peak power.
Horses for courses
Ive ridden the bike (well it is mine) with the super clubman and although it doesn't look much on the graph, compared to the others its an absolute delight to ride. always in the power however few revs you're pulling and if i were to ride on my own across Europe and the alps this would be my choice.
When it doesn't have the Case Induction engine, in I have the Nk road. great pipe once you get used to the lack of rev on. the TSR evo looks like it will give some of that at the loss of a little peak power.
Horses for courses
-
- registered user
- Posts: 246
- Joined: Sat Dec 29, 2012 5:07 pm
- Main scooter: Lambro, GP.
- Contact:
Jazzy, all I was going to put there was a thumbs up 'smilie' but there isn't one, :super clubman. Just by graphs, a lovely ride.
On the JB graphs, watch the recorded AFR, I'm sure John/ you've got it covered. Simon
On the JB graphs, watch the recorded AFR, I'm sure John/ you've got it covered. Simon
- mikeallen
- registered user
- Posts: 62
- Joined: Fri Jun 26, 2009 4:28 am
- Xbox live gamer tag: junkyevenflow69
- Location: Scottish Borders
- Contact:
I have one of these pipes which is still sitting in its box as I've not had time to fit it to the scooter yet but, on first inspection I'm concerned how the downpipe connects into the main body of the exhaust. The main body slides into the downpipe rather than the other way round like a clubman where the downpipe slides into the main body of the exhaust in the direction of the gas flow.
Surely if the main body slides into the downpipe rather than the other way round this joint is likely to blow
just wondered if those that have fitted this pipe found this a problem
cheers
Mike
Surely if the main body slides into the downpipe rather than the other way round this joint is likely to blow
just wondered if those that have fitted this pipe found this a problem
cheers
Mike