Hi,
About to install the PHBL25 on the above set up - is anyone else out there running this? Would appreciate advice on a baseline jet configuration.
The scooter lives in Sydney, so I appreciate that a UK set up will likely need to be tweaked to suit the humidity here.
Cheers,
Dan
Jetting? Casa 185 + PHBL25 + Broady Big Box
-
- registered user
- Posts: 235
- Joined: Fri Jan 22, 2010 7:54 pm
- Main scooter: SX200
- Location: NYC. LONDON
- Contact:
heres my spec, its a good start point for you
Running a casa 185 on a DL 125 with 42MM big bore.
98 main
266 Atomiser
45 pilot
D22 needle 2nd clip from top
Running it open mouthed .
air screw 1 3/4 turns out.
very nippy bit of kit for buzzing about town.
Running at 3%. Motul.
G
Running a casa 185 on a DL 125 with 42MM big bore.
98 main
266 Atomiser
45 pilot
D22 needle 2nd clip from top
Running it open mouthed .
air screw 1 3/4 turns out.
very nippy bit of kit for buzzing about town.
Running at 3%. Motul.
G
-
- registered user
- Posts: 195
- Joined: Sun Jan 16, 2011 5:21 pm
- Main scooter: jet ts1
- Location: birmingham
- Contact:
[quote
The scooter lives in Sydney, so I appreciate that a UK set up will likely need to be tweaked to suit the humidity here.
and your upside down
The scooter lives in Sydney, so I appreciate that a UK set up will likely need to be tweaked to suit the humidity here.
and your upside down
never squat down when wearing spurs !!