So yesterday had a quick errand to run and figured I'd use my trusty
old Silver special casa kitted 185 Dellorto 25mm. Kicked it in life...
died straight away....? Kicked again died.... wouldn't hold a tick over,
figured it was a blocked pilot jet or fuel tap issue ....took carb off and
viola .....carb float full of gas this is a new carb about 500 miles on
this set up ............Also had it happen to a kitted SX200 with a 30mm
dellorto........? Anyone else having these problems with these floats ??
If so how are you sealing them ? what glue to prevent the ethanol melting
the existing factory glue ? I need to pull all my new carbs and glue them .
Any insights would be most welcome ....... G.
25mm Dellorto Float melt
-
- registered user
- Posts: 235
- Joined: Fri Jan 22, 2010 7:54 pm
- Main scooter: SX200
- Location: NYC. LONDON
- Contact:
-
- registered user
- Posts: 235
- Joined: Fri Jan 22, 2010 7:54 pm
- Main scooter: SX200
- Location: NYC. LONDON
- Contact:
Not only but also ......BGM CDI failure as well G.
-
- registered user
- Posts: 221
- Joined: Thu Jan 29, 2009 1:45 pm
- Location: Norwich
- Contact:
Yes I've had the same on a couple of PHBH floats - I now carry a spare
Je fettle - Tu fettle - Il fettle - Nous fettleons - Vous fettlez - Ils fettlent
"Broadsword calling Danny boy ,Broadsword calling Danny boy ,over "
"Broadsword calling Danny boy ,Broadsword calling Danny boy ,over "
-
- registered user
- Posts: 360
- Joined: Thu Oct 11, 2012 7:17 pm
- Main scooter: Lambretta LI Special 225
- Contact:
Yes, i had a 30mm Delorto on my Avanti kit and have to date (in 2 .5 years) got through 3 new floats because of the same problem. Thing is on the Isle of Wight in August i climbed a steep road and the bike was flooding and trying to cut out, so i believe the float may have melted again. Not sure what the answer is, as it seems to keep doing this. I have an old 80s float from a 30mm carb used back then so may try this....
-
- registered user
- Posts: 1693
- Joined: Tue Jan 31, 2012 8:54 pm
- Main scooter: Lambretta GP
- Contact:
I had to sort out a mate's TS1 that suffered the same on a new white float PHBH 30mm
-
- registered user
- Posts: 360
- Joined: Thu Oct 11, 2012 7:17 pm
- Main scooter: Lambretta LI Special 225
- Contact:
thanks, i'll source one and try that