Revolver exhaust
- wack 63
- registered user
- Posts: 1254
- Joined: Fri Nov 27, 2009 9:33 pm
- Main scooter: '71 GP TS1
- Location: Lincs
- Contact:
Young Gun I know picked one of these up at Kettering and wondered if it would suit a standard PX 125 for now until he buys an adaptor to fit on a Malossi T5 172 he's gonna get or can you buy a T5 downpipe?
- hobospeed
- registered user
- Posts: 76
- Joined: Wed Jan 07, 2009 5:38 pm
- Location: Vancouver B.C.
- Contact:
This should do the trick:
http://www.scooter-center.com/en/produc ... FF_KRUMMER
Or this:
http://scootrs.com/moreinfo.cfm?Product_ID=1317
http://www.scooter-center.com/en/produc ... FF_KRUMMER
Or this:
http://scootrs.com/moreinfo.cfm?Product_ID=1317
- wack 63
- registered user
- Posts: 1254
- Joined: Fri Nov 27, 2009 9:33 pm
- Main scooter: '71 GP TS1
- Location: Lincs
- Contact:
Found this, so hopefully do the job. http://m.ebay.com/itm/321536829968?cmd=VIDESC&gxo=true. Thanks for the other inputs.
I would get the main bracket beefed up a bit , I helped rescue another YoungGun on the A1 , after his Revolver exhaust snapped at the bracket and wrapped around his back wheel, slicing his tyre in half. a combination of good riding, good weather and good luck kept him upright.
-
- registered user
- Posts: 57
- Joined: Sun Sep 04, 2011 5:50 pm
- Main scooter: Vespa Rally /P200
- Contact:
There is one of those in this months scootering , in the new bits section from VEhobospeed wrote:This should do the trick:
http://www.scooter-center.com/en/produc ... FF_KRUMMER
Or this:
http://scootrs.com/moreinfo.cfm?Product_ID=1317
2Ronnies sc.......Chuckleism is the way forward
it was the bracket on the main chamber.wack 63 wrote:On the body or the hanger bracket?