Hi all, just servicing an SX200, its running very, very rich!
this scoot was built more than 10 year ago and has finally got on the road.the carb is a 34mm Amal Mk2 .
anybody know where I can get info for jetting ,as I feel this has just been chucked together,its actually jetted higher than my TS1, also running an AF 44mm clubman
34mm amal jetting
- spannerman
- registered user
- Posts: 56
- Joined: Wed Jan 07, 2009 8:56 pm
- Location: PRESTON,LANCS.
- Contact:
Standard barrel,or something else?
- spannerman
- registered user
- Posts: 56
- Joined: Wed Jan 07, 2009 8:56 pm
- Location: PRESTON,LANCS.
- Contact:
standard barrel,supposedly worked by Harry Barlow (proporting)
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
power jet or non power jet ?
Sean Brady Scooters - 01765 690 698
- spannerman
- registered user
- Posts: 56
- Joined: Wed Jan 07, 2009 8:56 pm
- Location: PRESTON,LANCS.
- Contact:
non power jet, are there any sites that list this info ?
- spannerman
- registered user
- Posts: 56
- Joined: Wed Jan 07, 2009 8:56 pm
- Location: PRESTON,LANCS.
- Contact:
yep,thats where I have gone before,A/F said that due to changes in modern fuels it was misleading and took it down
-
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
I have the AF chart
there are no details for a 34 Amal on a standard 200 barrel but the following are listed
30mm 200 with clubman
mj 300-320
needle jet 107
needle 2D1
SLIDE 3-4
PILOT 35
CHOKE 50-55
MIXTURE 1/2 TURN OUT FROM STOP
All the listings for the 30 or 34mm amal are the same except the mj
hope this helps
Gaz
there are no details for a 34 Amal on a standard 200 barrel but the following are listed
30mm 200 with clubman
mj 300-320
needle jet 107
needle 2D1
SLIDE 3-4
PILOT 35
CHOKE 50-55
MIXTURE 1/2 TURN OUT FROM STOP
All the listings for the 30 or 34mm amal are the same except the mj
hope this helps
Gaz
- spannerman
- registered user
- Posts: 56
- Joined: Wed Jan 07, 2009 8:56 pm
- Location: PRESTON,LANCS.
- Contact:
Any chance of sending me a copy of the chart Gaz?,just picked up a 32mm amal that might work better,think the 34 is way too big
By the way thats not far off what its jetted at
By the way thats not far off what its jetted at