Went for a short ride today and i'm realy chuffed with the clutch.
It feels pretty much like a standard jobbie to pull in and the pull of the rb wrenches my guts so its def. not slipping.
I wont get to ride the 5 plate I bought for my TS until spring.
new 5/6 plate clutch for lambrettas
Joe,
The 6 plater I got from Lee that I run in my TaylorTuned 36hp doesn't have a packer .
Nice to see your scoot performing well at the shoot out matey
Mark
The 6 plater I got from Lee that I run in my TaylorTuned 36hp doesn't have a packer .
Nice to see your scoot performing well at the shoot out matey
Mark
-
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
does anybody have a contact number for Lee? i have tried pm but im getting no reply
thanx
Tony
thanx
Tony
-
- registered user
- Posts: 1900
- Joined: Wed Jan 14, 2009 12:21 am
- Contact:
Yeah same as that really, Xmas present from the mrs..thebassmasta wrote:does anybody have a contact number for Lee? i have tried pm but im getting no reply
thanx
Tony
-
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
i take it lee is not doing these clutches then, ive sent 2 messages yes or no would be sufficiant, but i will look elswhere now
are the messages read or unread .. have you checked when he was last on line ??
Its in bits scooter club: www.facebook.com/groups/132415046859320
-
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
yes both messages read, I give in buddy
go Jockeys Boxenstop ,LTH for the MMW 7 plate no packer clutch
-
- registered user
- Posts: 152
- Joined: Wed Jan 02, 2013 10:03 am
- Main scooter: GP TS1 240
- Location: Leicester
- Contact:
Not at £429 plus postageTED CRUD wrote:go Jockeys Boxenstop ,LTH for the MMW 7 plate no packer clutch
-
- registered user
- Posts: 1447
- Joined: Tue Jun 29, 2010 9:17 pm
- Xbox live gamer tag: No.
- Playstation gamer tag: PLEASE!
- Main scooter: Lambretta LI Imola 185
- Location: Farnborough Hampshire
- Contact:
I tried one of these clutches and had no joy with it (as already stated further back in the thread) I was convinced I needed a super duper clutch when in reality a standard clutch fitted with MB springs was more than up to the job. It wasnt until I fitted an NK race to my Imola that the clutch started to slip. I then put in a 5 plate kit from Readspeed into my existing clutch and it was fine. I'm not trying to put anyone off these clutches or slag them I'm just saying how it was for me.